Summary Of The Advantages Of Steel Silos

First, the overall performance is good, and the service life is long. The construction process of the steel silo is completely carried out using special equipment; during the rolling process, the outer wall of the silo is made of material five times thicker, with a 30 mm-40 mm wide spiral convex bar, which greatly enhances the bearing capacity of the silo. The overall strength, stability, and impact resistance of the steel silo are superior to those of other silos. Additionally, according to the anti-corrosion and grinding strength requirements of the stored materials, the storage materials department selects an appropriate plate ratio, allowing its normal service life to reach 30-40 years, far exceeding that of other warehouses.

Second, the sealing is effective, and the range of use is broad. Steel is particularly well sealed due to the use of rolling shaft special equipment to bend and bite, which ensures the quality of any part of the silo's body during this process. It can store cement, fly ash, slag ultrafine powder, and other powdered materials, which are widely used in the building materials industry, such as cement plants, power plants, and grinding stations.

Third, the construction period is short and the cost is low. The on-site construction of the spiral bite steel silo and ground installation on the top of the silo can be completed quickly. The forming and bending speed of the construction equipment from the steel silo manufacturer can reach 5m/min, and there is no need for auxiliary facilities such as scaffolding, resulting in a very short construction period. The screw bite steel silo is made of thin steel plates, and its weight is only equivalent to that of the steel bars in a reinforced concrete silo of the same capacity, significantly reducing costs. Furthermore, because it can be bent inside and outside the cylinder through double bending to form two different materials, it can greatly lower the engineering costs of storing corrosive materials in the chemical and environmental protection industries.

Fourth, it occupies a small area and is easy to manage. Unlike other silos, the height and diameter of the screw bite silo can be selected from a wide range. The minimum distance between two silos is 500mm, allowing for optimal space utilisation and reduced floor space. The spiral bite steel silo has a high degree of automation, combined with temperature measurement, material level, and other equipment, making it very convenient for users to manage.

Fifth, high strength: The continuous spiral bite of the steel silo is five times the thickness of the base metal, greatly enhancing the load resistance of the steel silo.

Sixth, small area and light weight: the height and diameter of the Dazheng silo can be selected from a wide range, and the spacing of the steel silo can be as small as 50cm, making full use of the space. The self-weight of the spiral steel silo is only 1/6 of that of a reinforced concrete silo of the same volume, which can significantly reduce the load structure of the foundation and the construction costs of the silo.