Large Steel Silo Manufacturers Share Its Six Advantages

When building a steel warehouse, you must also find a better manufacturer to achieve a good construction effect, and now the steel warehouse manufacturers on the market have great technology and are very worthy of their trust. The following is shared by large steel silo manufacturers, which are its six major advantages.

First, high strength. The continuous spiral undercut of the steel silo is five times the thickness of the base metal, which greatly strengthens the load resistance of the steel silo.

Second, the area is small and the weight is light. The height and diameter of the large silos can be selected over a wide range, and the spacing between the steel silos is as small as 50 cm, which makes full use of the space. The self-weight of spiral crimped steel silo is only 1/6 of the same volume concrete silo, and the weight of the steel bar of the same volume concrete silo is the same, which can greatly reduce the load of the basic structure and the cost of building the warehouse.

Third, the construction period is short and the cost is low. On-site construction of spiral bite steel silo and installation on the top of the silo. The forming and bending speed of Lipper's construction equipment can reach 5 m/min, and there is no need for scaffolding and other auxiliary facilities, so the construction period is short. The spiral bite steel silo is made of thin steel plates, and the weight is only equivalent to the weight of the steel bars of the reinforced concrete silo of the same capacity, which greatly reduces the cost. In addition, because it can bend and form two different materials inside and outside the cylinder by the double-layer bending method, it can greatly reduce the engineering cost of storing corrosive materials in chemical, environmental protection and other industries.

Fourth, it occupies a small area and is easy to manage. Unlike other steel silos, the height and diameter of the spiral bite steel silo can be arbitrarily selected within a wide range. The distance between the two bins is as small as 500 mm, which makes full use of the space and reduces the footprint. The spiral bite steel silo has a high degree of automation, and is equipped with temperature measurement, material level and other equipment, which is very convenient for users to manage.

Fifth, the air tightness is good, and the use is wide. Due to the use of special equipment for coil silo bending and biting, the steel silo can ensure the quality of any part of the silo body in the process, so its sealing is particularly good, and it can store cement, fly ash, slag ultrafine powder and other powdery materials, which is widely used in the building materials industry. Such as cement plants, power plants, grinding stations.

Sixth, Good performance and long life. In the process of construction, the steel silo is completely constructed by special equipment, and in the rolling process, the outer wall of the silo is made of a spiral convex bar that is 5 times the thickness of the material and 30 mm to 40 mm wide, which greatly strengthens the bearing capacity of the silo and makes the overall strength, stability and seismic resistance of the steel silo better than other silos. In addition, according to the requirements of anti-corrosion and grinding strength of the stored materials, the warehouse material selects a good plate ratio, so that its normal service life is 30-40 years. far exceeds the service life of other silos.